|
|
Electrical Specifications |
|
|
AC input voltage |
|
230 VAC |
|
|
AC input voltage range |
|
150-288 VAC |
|
|
AC input current |
|
30 amps AC pass through 15 amps AC charging |
|
|
Continuous Power @ 25°C |
|
3300 VA |
|
|
Efficiency (Peak) |
|
94 % |
|
|
Output voltage (RMS) |
|
230 VAC |
|
|
Output voltage Regulation |
|
+/- 5% |
|
|
Waveform |
|
Sine wave, 34 to 52 steps per cycle |
|
|
Frequency
(Nominal +/- 0.04% crystal controlled) |
|
50 Hz |
|
|
Continuous output @ 25°C |
|
14 amps AC |
|
|
Total Harmonic Distortion |
|
< 5% |
|
|
Automatic transfer relay |
|
30 amps AC pass through 15 amps AC charging |
|
|
DC input voltage (Nominal) |
|
24 VDC |
|
|
DC input voltage range |
|
22-33 VDC |
|
|
DC current at rated power |
|
176 amps DC |
|
|
Short circuit current |
|
320 amps DC |
|
|
Idle consumption |
|
< 16 watts |
|
|
Search mode consumption |
|
< 1 watt |
|
|
Low battery protection (Enabled) |
|
Adjustable low battery cut out |
|
|
Max. charge rate (adjustable) |
|
100 amps DC |
|
|
Load Sensing (Inverter Mode) |
|
Adjustable, 0 to over 200 watts (48 watts default) |
|
|
General Specifications |
|
|
Specified temperature range |
|
32°F - 77°F (0°C - 25°C) |
|
|
Enclosure type |
|
Indoor, ventilated, steel chassis with powdercoat finish |
|
|
Unit weight |
|
105 lb (48 kg) |
|
|
Shipping |
|
111 lb (50 kg) |
|
|
Inverter dimensions (H x W x D) |
|
15 x 22.5 x 9" (38 x 57 x 23 cm) |
|
|
Shipping dimensions (H x W x D) |
|
20 x 27 x 15" (52 x 69 x 40 cm) |
|
|
Mounting |
|
Wall mount |
|
|
Warranty |
|
Two years |
|
|
Part Numbers |
|
SW3024E |
|
|
Features & Options |
|
|
Forced air cooling |
|
Standard variable speed brushless DC fans |
|
|
Three-stage charging |
|
Standard three-stage (bulk, absorption, and float) |
|
|
Control panel |
|
Standard built-in, two line, backlit, alphanumeric LCD with 8 LED status indicators |
|
|
Auto Generator Control System |
|
Standard automatic generator control system for two and three wire start generators |
|
|
Auxiliary Relays |
|
Standard three user adjustable voltage controlled signal relays for control of loads or charing sources |
|
|
Battery Temperature Sensor |
|
BTS - standard remote battery temperature sensor for increased battery performance |
|
|
Remote Control |
|
SWRC - optional remote control and status indicator |
|
|
Conduit Box |
|
SWCB - optional side mount conduit box for code-compliant DC wiring connections |
|
|
Regulatory Approvals |
|
|
CE Mark |
|
|
|
Note: Specifications subject to change without notice. |
|
|
Product Info
| Specifications | Document Downloads | Compare
