Electrical Specifications

AC Input Voltage (nominal)

120 VAC

AC Input Voltage Range, adjustable

80-150 VAC

AC Input Current

60 amps AC pass through / 20 amps AC charging

Continuous Power @ 40°C

2500 watts

Efficiency (peak in Inverter mode)

95%

Efficiency (Invert mode)

Over 90% from 120W to 2000W

Inverter Voltage Regulation

+/- 3%

Frequency (Nominal +/- 0.04% crystal
controlled) Inverter mode

60 Hz

Continuous Output Current  @ 25°C

21 A rms

Current Surge Capability  @ 25°C:

5 sec rating

80 A rms

Over current trip point

125 A peak

Inverter Voltage THD (Resistive load)

< 5%

Automatic Transfer Relay

60 A rms

DC Input Voltage (Nominal)

25.2 VDC

DC Input Voltage Range

22-32 VDC

DC Current at Rated Power (Inverter mode), internal temperature stabilized

120 amps DC

Idle Consumption (Typical at full voltage)

< 16 watts

Search Mode Consumption (Typical at full voltage)

< 2 watts

Continuous Charge Rate @ 120 VAC input
(See Note 1 below)

70 amps DC

Mechanical Specifications

Operating Temperature Range:

Unit will meet specifications

32°F - 77°F (0°C - 25°C)

Unit may not meet specifications

-13°F - 140°F (-25°C - 60°C)

Storage

-67°F - 284°F (-55°C - 140°C)

Enclosure Type

Indoor, ventilated, Galvaneel chassis with powdercoat finish

Unit Weight

105 lb (48 kg)

Shipping Weight

111 lb (50 kg)

Inverter Dimensions (H x W x D)

15 x 22.5 x 9" (38 x 57 x 23 cm)

Shipping Dimensions (H x W x D)

20 x 27 x 15" (52 x 69 x 40 cm)

Mounting

Wall mount/Shelf

Features

Forced Air Cooling

Standard variable speed brushless DC fans

Multi-stage charging

Bulk, absorption, float/silent, and equalize

Control Panel

Standard built-in, two line, backlit, alphanumeric LCD with 8 LED indicators

Battery Temperature Sensor (BTS)

BTS - standard remote battery temperature sensor for increased battery performance

Options

Generator Start Module (GSM)

Automatic generator control system for two and three wire start AC and DC generators

Auxiliary Load Module (ALM)

User adjustable voltage controlled signal relays for control of loads or charging sources

Remote Inverter Control Module (ICM)

Optional full function remote control with LCD and LED indicators

RC8

Optional remote on/off with indicator

Stacking Interface (ISC-S)

Optional cable for series of stacking of two identical SW Plus units for 120/240 VAC output

DC Conduit Box (DCCB)

Optional side mount conduit box for code-compliant DC wiring connections (USA)

DC Conduit Box Fused (DCCB-F)

Optional side mount conduit box for code-compliant DC wiring connections with fuse (Canada)

AC Conduit Box (ACCB)

Optional side mount conduit box for code-compliant AC wiring (bypass/disconnect circuit breakers)

Common Specifications

Waveform

Sine wave, 34 to 52 steps per cycle

Load Sensing (Inverter Mode)

Adjustable 8 to 248 watts (8 watts default)

Listings

CSA listed to UL 1741 and CSA107.1 FCC Class B

Note: Specifications subject to change without notice.