Product Information

The XW Power Distribution Panel (XW PDP) is factory-wired and labeled to support a codecompliant single-inverter installation. It has plenty of room to add wiring and breakers to expand the XW System with up to three inverters, four charge controllers, or other equipment to support 120/240-volt, three-wire, single-phase systems. With a field-reversible door and multiple conduit knockout locations, the PDP can be configured to mount on either side of the inverter/charger.

The XW Power Distribution Panel (XW PDP) is designed to save significant time and money during installation, taking less than 25 percent of the time to install, when compared to competing solutions. A mounting plate and XW Conduit Box is supplied with each XW PDP.

Product Compatibility

The distribution panel and conduit box interface with the following products:

• XW Connection Kit (for second XW Hybrid Inverter/Charger) and XW Conduit Box
• XW4024, XW4548, and XW6048 Inverter/Chargers
• XW Solar Charge Controllers (requires customer-supplied breakers and wiring)
• C-Series Charge Controllers (requires customer-supplied breakers and wiring)

XW PDP dimensions (H x W x D): 30 x 16 x 8.25” (761 x 406 x 210 mm)
Shipping dimensions (H x W x D): 48 x 21 x 13.5” (1220 x 533 x 343 mm)
Shipping weight: 67.2 lb (30.5 kg)

XW PDP ships with:
Power Distribution Panel enclosure with a field-reversible panel door, pre-wired with:

• Three 60 A, 120/240 Vac, two-pole, Square-D, Type QOU, DIN-rail mounted AC breakers for AC input, Bypass, and AC Load
• One GJ250A 160 Vdc, 3/8” stud DC breaker
• One ground terminal bus bar
• One neutral terminal bus bar
• One battery negative terminal bus bar
• One pair #4/0 AWG Arctic Ultraflex Blue™ Battery Cables (factory installed and labeled, ready to connect)
• #6 AWG Arctic Ultraflex Blue™ AC wiring (factory installed and labeled, ready to connect)
• Room to expand - Five additional AC breaker positions for two-pole, 60 A Square D, Type QOU breakers; 10 additional DC breaker positions (eight for charge controller breakers and two for large GJ inverter breakers)
• Mounting Plate
• XW Conduit Box