Home Products Support Buy Company Contacts
English Deutsch Français Italiano Español Korean
 
[Enlarge Image]

 
 
Xantrex IP1012 AL Inverter/Charger

Weatherproof inverter/charger designed for marine and commercial applications

The Xantrex IP1012 AL Inverter/Charger is a safe, clean, quiet alternative to operating a generator or idling an engine to provide power.


 
Product Info | Specifications | Document Downloads | Compare
 

Product DataSheets

 Electrical Specifications - Inverter  
 Output power (continuous)  1000 W
 Maximum power (surge)  3000 W (36 A peak)
 Output frequency regulation  60 +/- 0.1 Hz
 Inverter voltage regulation  108 to 125 Vac (full range at 25°C)
 Battery voltage range  10.4 - 16 Vdc
 Low battery cut-out  10.6 Vdc (heavy loads); 10.8 Vdc (light loads)
 Output wave form  Modified sine wave
 Efficiency  90%
 Peak efficiency  93%
 No-load current draw (idle mode)  <650 mAdc
 AC transfer switch  20 A 
 Electrical Specifications - Charger  
 Charge rate  50 Adc
 AC input voltage range  100 - 130 Vac 
 Battery voltage (nominal)  12 Vdc
 AC input (max. charge mode)  13 Aac rms
 Absorption charge voltage  14.3 +/- 0.3 Vdc
 Float charge voltage  13.3 +/- 0.3 Vdc
 Battery charge outputs  1
 Charge control  Three-stage
 Battery type settings  Flooded or AGM
 Equalization  No
 Temperature sensitive charging  Yes
 General Specifications  
 General Specifications  
 Optimal operating temperature range  -40°C to 85°C (-40°F to 185°F). Charger output de-rated above 30°C
 Controls  Remote switch 
 Dimensions (H x W x L)  8.56 x 7.25 x 13.00” (218 x 185 x 330 mm)
 Mounting  Externally mounted 
 Weight  40 lb (18 kg)
 Warranty  Two years
 Part number 805-1011
 Regulatory Compliance  ABYC, Ignition protected, UL458 Marine, IP66 moisture and dust resistant enclosure, SAE J1455, FCC Class B
 
 Note : Specifications subject to change without notice 

 
   
   
 
     
 Web Site Terms & Conditions
©2000 - 2009 Xantrex Technology Inc.