| |
Electrical Specifications |
| |
AC input voltage |
|
240 VAC |
| |
AC input voltage range |
|
170-298 VAC |
| |
AC input current |
|
30 amps AC pass through 15 amps AC charging |
| |
Continuous Power @ 25°C |
|
4000 VA |
| |
Efficiency (Peak) |
|
96% |
| |
Output voltage (RMS) |
|
240 VAC |
| |
Output voltage Regulation |
|
+/- 3% |
| |
Waveform |
|
Sine wave, 34 to 52 steps per cycle |
| |
Frequency
(Nominal +/- 0.04% crystal controlled) |
|
50 Hz |
| |
Continuous output @ 25°C |
|
34 amps AC |
| |
Total Harmonic Distortion |
|
< 5% |
| |
Automatic transfer relay |
|
30 amps |
| |
DC input voltage (Nominal) |
|
48 VDC |
| |
DC input voltage range |
|
44-66 VDC |
| |
DC current at rated power |
|
120 amps DC |
| |
Short circuit current |
|
180 amps DC |
| |
Idle consumption |
|
< 20 watts |
| |
Search mode consumption |
|
< 1 watt |
| |
Low battery protection (Enabled) |
|
Adjustable low battery cut out |
| |
Max. charge rate (adjustable) |
|
60 amps DC |
| |
Load Sensing (Inverter Mode) |
|
Adjustable, 0 to over 200 watts (48 watts default) |
| |
General Specifications |
| |
Specified temperature range |
|
32°F - 77°F (0°C - 25°C) |
| |
Enclosure type |
|
Indoor, ventilated, steel chassis with powdercoat finish |
| |
Unit weight |
|
136 lb (63 kg) |
| |
Shipping |
|
143 lb (65 kg) |
| |
Inverter dimensions (H x W x D) |
|
15 x 22.5 x 9" (38 x 57 x 23 cm) |
| |
Shipping dimensions (H x W x D) |
|
20 x 27 x 15" (52 x 69 x 40 cm) |
| |
Mounting |
|
Wall mount |
| |
Warranty |
|
Two years |
| |
Part Number |
|
SW4548A |
| |
Features & Options |
| |
Forced air cooling |
|
Standard variable speed brushless DC fans |
| |
Three-stage charging |
|
Standard three-stage (bulk, absorption, and float) |
| |
Control panel |
|
Standard built-in, two line, backlit, alphanumeric LCD with 8 LED status indicators |
| |
Auto Generator Control System |
|
Standard automatic generator control system for two and three wire start generators |
| |
Auxiliary Relays |
|
Standard three user adjustable voltage controlled signal relays for control of loads or charing sources |
| |
Battery Temperature Sensor |
|
BTS - standard remote battery temperature sensor for increased battery performance |
| |
Remote Control |
|
SWRC - optional remote control and status indicator |
| |
Conduit Box |
|
SWCB - optional side mount conduit box for code-compliant DC wiring connections |
| |
Regulatory Approvals |
| |
CE Mark |
| |
| Note: Specifications subject to change without notice. |
Product Info
| Specifications | Compare | List Price