Prosine 2.0/2.5/3.0
FAQ questions below answer popular questions related to the Prosine Inverter/Chargers.
How can I connect a generator to my Prosine?
Why are there two sets of AC output terminals?
Can I extend the remote panel cord?
Can I use the Truecharge temp sensor with the Prosine?
How can I connect a second battery bank to my Prosine?
Why does my 25 W light bulb cycle ON and OFF when my Prosine is in inverter/ search mode?
Why do my AC lights flicker and there is a clicking sound from Prosine every 8 seconds when the Prosine is in invert mode and shore power is disconnected?
Why is Prosine unable to provide the full 105 A charging current and charging voltage is lower than 13 V, despite battery size/setting being more than 400 Ah and a deeply discharged state of charge?
Why does the Prosine 2.5 inverter/charger have to be mounted vertically as stated in Section 2.3.1 of the installation manual?
What conditions make Prosine 2.5 / 3.0 fans turn on?
Web Site Terms & Conditions
©2000 - 2009 Xantrex Technology Inc.