Xantrex Technology Inc.

BC & XC Series Chargers

Which accessories go with the XC Series Chargers?
Which accessories go with the BC Series Chargers?
Can I use more than one remote?
Does an extension cable come with the remote?
Does the Easy Shunt work like a regular shunt with other Xantrex battery monitor products (eg. XBM or Link Monitors)?
I have connected the Easy Shunt but the charger does not display the ampere hours. What's wrong?
Why does my Easy Shunt show more ampere hours drawn from my battery than the actual capacity of the unit?
How many battery temperature sensors can be connected to the XC and BC chargers?
Getting temperature sensing for a bank when the Easy Shunt is connected.
Parallel connection for BC or XC Series Chargers.
Digital display doesn't show the charging status for all three outputs.
Display does not cycle through the banks in order.
Can the voltage setting for the charge algorithms be adjusted?
Can the BC and XC series chargers equalize batteries?
I had only 2 batteries connected to the charger and when I added a third (new) battery the charger would not show its voltage on the display. Why?
I connected a different battery to one of the output banks but the charger will not see it or charge it. I have forced a battery detection cycle but it still does not acknowledge the additional battery. What’s wrong?
What’s the maximum distance I can mount the remote display from the charger?
I mounted the charger on a bulkhead in my boat (vertical orientation) but the display is upside down (the way it came in the box). How am I supposed to read it?
A flat black piece of metal came in the hardware package with the charger. What is it for?
My 50 amp charger shows 53 and sometimes 54 amps when it’s in bulk stage. Is it damaged or will it burn out from overload?
My charger seems to be working ok but it takes longer than it should to charge, and the charging voltage on the display never reaches 14 Volts, even in bulk or absorption stage. Is there something wrong with it?
How much current will the XC/BC5012 pull from the AC source (generator or shorepower)?
Why do you sell a separate remote?
"No Con" error message

Web Site Terms & Conditions